| MecVel Srl

Attuatore lineare ALI23

Alice — Wed, 21 Jan 2026 09:39:32 +0000

Attuatore Lineare Elettrico modello ALI23

Motore CA monofase-trifase
Motore CC a magneti permanenti 12-24V
Riduttore vite senza fine-ruota elicoidale
Stelo filettato trapezoidale o a ricircolo di sfere (VRS)
Asta traslante in acciaio cromato
Lubrificazione permanente a grasso
IP55 CA
IP 65 CC testato secondo norma CEI EN 60529 – NB: solo per motori autofrenanti standard IP 54, IP65 a richiesta
Temperatura di funzionamento -10°C +60°C
Impiego intermittente S3 30% (5 min) a 30°C per versione CA
Fine corsa, potenziometro ed encoder a richiesta

L'articolo Attuatore lineare ALI23 proviene da MecVel Srl.

AM Servoactuators

Davide — Wed, 30 Mar 2022 12:28:03 +0000

This range of hybrids, the line of servo actuactors AM, between linear actuators and servo actuators gives shape to a kind of product perfect for the latest generation of brushless and stepper motors.
It is designed in detail to ensure a constant and optimal control on position, speed and force reached during each linear movement.

The AM line, in fact, has been developed for those applications requiring high speeds even with medium/high loads. It can operate particular movements acting as robotic arms and performing precise handling. For these models, that are required to do particular movements, where all the power at disposal is adjusted according to specific needs, in order to reach the best result.

Use this form to configure the product and get in touch with our staff!

L'articolo AM Servoactuators proviene da MecVel Srl.

Electronic drive

Sviluppo — Mon, 21 Mar 2022 10:55:41 +0000

Electronic drive for 2 actuators synchronism

This driver is designed to drive two actuators in parallel. The drive is done as drivers synchronized according to the actuator pulse feedback signal. The synchronization is achieved by adjusting the actuator speed during movement. If the adjustment can not compensate for the imbalance between actuators, the motors will be stopped by the electronic drive. This way mechanical stress and breakage can be avoided. Additively, the driver includes the current limit and power stage temperature limit.

L'articolo Electronic drive proviene da MecVel Srl.

KP Screw jacks

Sviluppo — Mon, 21 Mar 2022 10:52:52 +0000

Due to market requests for a constant reduction of costs and delivery time, the company proposes its KP solution, born by HT and HR screw jacks range.
The KP series is dedicated to the easiest lifting systems, both vertical and horizontal, where performing the movement just requires a hand wheel for the manual driving or an electric motor for starting it, components usually available in the market, as well as belts and pulleys, while MecVel provides the heart of the motion.
The company offers four different sizes of gearboxes already mounted and grease lubricated, up to 5 kN (500 kg), from 5 to 10 kN (1 ton), from 10 to 25 kN (2,5 tons) and 25 to 50 kN (5 tons), with two gear ratios ready for delivery: 1:10 and 1:30.

KP line is subdivided in two kinds of kits:

KT version, where the acme screw runs through the gearbox
KR version, where the acme screw rotates integrally with the gearbox. In this case the linear motion is performed by a nut travelling along the acme screw.

According to the kind of kit, MecVel combines the acme screw in a different way:

With KT, it is supplied in one meter steps, which the customer can furtherly cut depending on the stroke length needed
With KR, it is supplied with a working stroke of 500 mm, and the rear end is modified for the correct join with the gearbox. The front end is “at customer disposal”, to adjust the acme screw length according to application requests.

L'articolo KP Screw jacks proviene da MecVel Srl.

HRS Linear actuator

Sviluppo — Mon, 21 Mar 2022 10:50:32 +0000

The HRS actuator takes shape from the join between the efficiency and safety of linear actuators with the resistance and load capacity of screw jacks It places itself as a hybrid, able to take the best from these two different kinds of products and offering excellent performance.

This range is dedicated mainly to heavy industry, outdoor applications, and other situations where environmental conditions are critical. This is thanks to a customization service provided by the company that allows one to configure each product in detail. The HRS linear actuator configured can then be perfectly suitable for the linear motion for which it is intended.

Use this form to configure the product and get in touch with our staff: form.

L'articolo HRS Linear actuator proviene da MecVel Srl.

HP5 linear actuator

Sviluppo — Mon, 21 Mar 2022 10:48:13 +0000

Due to renewable energies’ relevance for the company, performances have been specifically developed to meet photovoltaic industry needs. The HP5 can also keep a very high static load in case of long strokes (>500 mm). At the same time, it maintains extremely low both speed and consumption (15000 N with 2 mm/s and 6 A).

HP5 states itself as a new configuration with structural strength and flexibility, to model itself in compliance with applications requiring high load capacity and moderate speed, to get precise and controlled movements. The high efficiency supplied by HP5 linear actuator is ensured by the top-quality assembling components and the great attention to dimensions and fixing systems, making it versatile and easy to install in any system.

2024 UPDATE – AC powered HP5 The new version works with an AC motor, combining the same strength and performance of the CC version, but with even less energy consumption! To discover all the news about the new electric linear actuator model HP5, download the brochure!

Use this form to configure the product and get in touch with our staff: form

L'articolo HP5 linear actuator proviene da MecVel Srl.

Couplings G-GM

Davide — Thu, 17 Mar 2022 11:14:18 +0000

Types of couplings available:

Elastomeric jaw couplings with good vibration-dampening properties.

Consult our catalogue to discover the products available or use this form to configure the product and get in touch with our staff.

L'articolo Couplings G-GM proviene da MecVel Srl.

Shafts AT-ATM

Davide — Thu, 17 Mar 2022 11:14:18 +0000

The main AT-ATM shafts features:

Radial mounting
3 mt. max length
Low inertia momentum
Vibration absorption
Safe tight-on mounting
No angular backlash

Consult our catalogue to discover the products available or use this form to configure the product and get in touch with our staff.

L'articolo Shafts AT-ATM proviene da MecVel Srl.

Bevel Gear BC2

Davide — Thu, 17 Mar 2022 11:14:17 +0000

The bevel gear transmits power through orthogonal shafts.
The bevel gear housing can also have a cubic shape (BC line), with all six faces completely machined.
The bevel gear shafts are made of carbon steel.

L'articolo Bevel Gear BC2 proviene da MecVel Srl.

Bevel gear BC1

Davide — Thu, 17 Mar 2022 11:14:17 +0000

The bevel gear transmits power through orthogonal shafts.
The bevel gear housing can also have a cubic shape (BC line), with all six faces completely machined.
The bevel gear shafts are made of carbon steel.

L'articolo Bevel gear BC1 proviene da MecVel Srl.