Shop

electronic drive

Electronic drive

Electronic drive for 2 actuators synchronism

This driver is designed to drive two actuators in parallel. The drive is done as drivers synchronized according to the actuator pulse feedback signal. The synchronization is achieved by adjusting the actuator speed during movement. If the adjustment can not compensate for the imbalance between actuators, the motors will be stopped by the electronic drive. This way mechanical stress and breakage can be avoided. Additively, the driver includes the current limit and power stage temperature limit.

Tech values

  • Working temperature -20°C/+60°C
  • Modbus RTU RS458
  • Synchronized parallel driving
  • Current and temperature limit
  • Speed control
  • Motor brake output control
  • Acceleration and deceleration ramps
  • Stroke length limit control

Download Area

Configuration form

▸ Flyer

▸ Software and manuals

Product configurator

The 3D Configurator is not available for this product.

Use the configuration form to set the electronic drive!